TELEX BTR800/C6 ( Frequenza 554-572/704-722MHZ )
UHF, frequency agil, 2 channel wireless intercom base station with stage announce
and WTA/ISO function 4 pin male XLR for headset
The RTS RadioCom BTR-800 UHF-synthesized wireless intercom systems offer the
ultimate in reliable, high performance, high fidelity full-duplex communications The
BTR-800 system includes the BTR-800 frequency-agile base station, working with up to
four (4) TR-800 or TR-825 frequency-agile beltpacks The BTR-800 base station provides
full-duplex communications with the beltpacks The BTR system incorporates two (2)
audio channel operation, permitting the beltpack operator to choose between two
(2) separate audio channels of communications, with the base station tracking the
beltpack selection This allows the user the flexibility to create a party line and a
private line within the same beltpack
Specifications
RF Frequency Range : see relative variant (in 18MHz TX and RX bands)
Power Requirements : 100-240VAC, 50-60Hz IEC receptacle
Temperature Range : -4�F to 130�F (-20�C to 55�C)
TX Antenna : � Wave (supplied), TNC Male Connector
RX Antenna : � Wave (supplied), TNC Male Connector
Frequency Response : 300Hz-8kHz
4-Wire In/Output : Level Adjustable (2VRMS typical)
AudioCom/Telex Intercom : In/Out Level Adjustable (1VRMS typical), Line Impedance
300O
RTS Intercom : In/Out Level Adjustable (0.775VRMS), Line Impedance
200Ohm
Clear-Com Intercom : In/Out Level Adjustable (1VRMS typical) Line Impedance
200O
Auxiliary Input : Adjustable (2VRMS typical)
Auxiliary Output : Adjustable (2VRMS typical into 600Ohm)
Stage Announce : Output Internally Adjustable (2VRMS typical at rated
deviation into 600O)
Stage Announce Relay : Dry contact, rated at 1Amp, 24VMax
Micro Input Sensitivity : 9mV
Local Headset Output : 40mW output into 600O (1% Distortion)
Transmitter Type : 2 Synthesized Transmitters 712 channels each
Transmit Power (each tx): 100mW Max (High) 10mW (Normal)
Modulation Type : FM
Deviation : 40kHz (35kHz Europe)
RF Frequency Stability : 0.005%
Modulation Limiter : Peak-Responding compressor
Radiated Harmonics & Spurious: Complies with FCC specifications
Receiver Type : Dual Conversion Superheterodyne four (4) Independent
Synthesized IFs FM, 712 channels each
RF Sensitivity : <08�V for 12dB SINAD
Squelch Threshold : 20dB SINAD
IF Selectivity : 3dB at 230kHz
Image Rejection : 70dB or better
Squelch Quieting : 90dB RF Frequency Stability: 0005%
Distortion : <1% at full deviation
Product Dimens/Weight
BTR-800 : 48.3x4.4x35.6cm / 3.24kg)
Shipping Dimens/Weight
BTR-800 : 43.2x12.7x58.4cm / 5.43kg)
Frequency Variants
BTR800-A2 Frequenza (518-536/632-650MHZ)
BTR800-B4 Frequenza (536-554/668-686MHZ)
BTR800-C6 Frequenza (554-572/704-722MHZ)
BTR800-F1 Frequenza (482-500/614-632MHZ)
BTR800-F3 Frequenza (482-500/650-668MHZ)
BTR800-H1 Frequenza (500-518/614-632MHZ)
BTR800-H3 Frequenza (500-518/650-668MHZ)
Beltpacks RX and Frequency Variants applicable
TR800-A2 Frequenza (518-536/632-650MHZ)
TR800-B4 Frequenza (536-554/668-686MHZ)
TR800-C6 Frequenza (554-572/704-722MHZ)
TR800-F1 Frequenza (482-500/614-632MHZ)
TR800-F3 Frequenza (482-500/650-668MHZ)
TR800-H1 Frequenza (500-518/614-632MHZ)
TR800-H3 Frequenza (500-518/650-668MHZ)
TR825-A2 Frequenza (630-654MHZ)
TR825-B4 Frequenza (678-702MHZ)
TR825-C6 Frequenza (710-722MHZ)
TR825-F1 Frequenza (614-632MHZ)
TR825-F3 Frequenza (650-668MHZ)
TR825-H1 Frequenza (614-632MHZ)
TR825-H3 Frequenza (650-668MHZ)
Accessories
AB-2 Universal bracket for CLA-X � wave antennas with 10' coax
ALP-450 Directional log periodic antenna Covers 450-900MHz Forward coverage
pattern
increases signal gain up to 5 dB Supplied with mounting hardware for
wall or
mic stand and 10' coaxial cable Measures 9�"x11"H painted matte black
ALP-600 Bi-directional log periodic antenna Covers 520-760 MHz Includes mounting
hardware and 10' (3 m) coaxial cable with TNC connector
ALP-600B ALP-600 antenna bracket kit
ALP-600M ALP-600 antenna mast-telescoping
ALP-700 Bi-directional log periodic antenna Covers 470-760 MHz Unique side-to
side and front to back coverage pattern increases single gain up to
1,8dBd Includes mounting hardware, clamp and 3mt coaxial cable with TNC
connector
Painted black with TNC connector Measures 274,6x422mm (LxH)
APS-1 Two to one antenna combiner/splitter with TNC connectors
CXU50 O low loss coaxial cable with TNC connectors (multiple lengths
available)
FA-xx � wave colinear antenna (multiple frequency ranges)
RM-800 Rackmount reinforcement for BTR-800/BTR-700
TP-2 TNC 50 O termination plug and ACS-101 antenna combiner
TP-3 XLR-3 Intercom "dummy load" plug (AudioCom)
TP-3R XLR-3 Intercom "dummy load" plug (RTS)TELEX
