TR-240/A4M (F.01U.168.689) Version with XLR-4M
The TR-240 beltpacks have the ability to be configured in one of three operating
modes: wireless, wired, or master wireless In wireless (normal) mode, beltpacks
communicate to each other using the base station as a relay In wired mode, beltpacks
turn off their wireless ability and communicate via Ethernet cable or through a
building's existing Ethernet infrastructure In master wireless mode, the beltpack acts
as a mobile access point to provide wireless coverage for other beltpacks to
communicate without an actual BTR-240 base station The TR-240 beltpack has a removable
lithium ion battery pack that provides up to eight (8) hours of uninterrupted
operation The battery pack can be charged directly in the case by plugging a power
adapter into the beltpack or by placing the battery in the CHG-240 4-bay charger
Features
- License Free 2.4GHz, IEEE 80211b WLAN technology
- Expand coverage using BTR-24 access points
- Multi-level security and audio encryption
- 2-wire and 4-wire intercom interface
- ClearScan channel selection
- Auto-select Electret or Dynamic microphone
- Choice of two (2) independent or simultaneous audio channels
- TR-240 beltpacks operate wired or wireless
- Eight (8) full-duplex beltpacks with virtually unlimited number of half-duplex
beltpacks
- TR-240 beltpacks can operate as an access point
- Multiple antenna options and accessories
- Durable ABS construction
- Easy-to-read LCD indicates system status
- Removable Li-Ion batteries with wide temperature range and up to eight (8) hours of
operation
Specifications
- RF Technology : IEEE 80211b WLAN
- FCC License : None Required
- Freq.Band of Operation : U.S.A : 2.412 to 2.462GHz
Europe: 2.412 to 2.472GHz
BTR-240 Tx Output Power : U.S.A. 200mW
Europe 70mW
TR-240 Tx Output Power : 70mW
BRT-240 Antennas : Multiple Omni and Directional Available
TR-240 Antennas : Internal Dipoles
Security and Encryp.Techn: 80211 WiFi: 40-bit and 104-bit WEP
Audio : 64-bit DES
Full-Duplex Beltpacks : 8
Half-Duplex Beltpacks : = 100
Audio Frequency Range : 350Hz to 35kHz
Dynamic Range : =62dB
System Latency : = 140msec
BRT-240 Headset Output : 100mWrms into 300 Ohms
TR-240 Headset Output : 70mWrms into 300 Ohms
4-Wire Input/Output : Level Adjustable (2Vrms typical)
Audiocom 2-Wire In/Output: Level Adjustable (0.775Vrms typical)
Line Impedance : 200 Ohms
RTS 2-Wire : Level Adjustable (1Vrms typical)
Input/Output : Line Impedance 200 Ohms
Clear-Com 2-Wire : Level Adjustable (1Vrms typical)
Input/Output : Line Impedance 200 Ohms
Auxiliary Input : Level Adjustable (2Vrms typical)
Auxiliary Output : Level Adjustable (2Vrms typical into 600 Ohms)
Speaker Output : Level Adjustable (1Vrms max into 8O)
Front Panel LCD : 122x32 Dot Matrix with Adjustable Contrast
Programming Port : Ethernet (RJ-45)
BTR-240 Power Requir. : 12-15VDC, 15 Amps
TR-240 Power Requir. : Lithium Ion Rechargeable Battery, 75VDC
Battery Life : Up to eight (8) hours
Battery Recharge Time : Via TR-240: approx 8 hours
Via CHG-240 four bay charger: approx 25 hours
TR-240 Low Batt Indicat : Approx 15 minutes of battery life left
Temperature Range : -4�F to 130�F (-20�C to 55�C)
BTR-240 Dimensions : 1RU 191x483x45mm
BTR-240 Weight : 1.58kg
TR-240 Dimensions : 45x95x133mm
TR-240 Weight : 0.37kg)
