LEN LTD LAMGI02 AES MADI ASI Galvanic In-Line Isolator with flange

Overview

These AES/MADI/ASI ground isolators use a broadband high-pass filter to provide complete galvanic isolation of DC currents between two pieces of equipment, whilst permitting the full bandwidth of the digital signal to pass, thus avoiding problems of signal distortion and operator shocks caused by a voltage difference.

This method out-performs broadband transformers for these digital signals. Additionally, some broadband transformers invert the signal, which is incompatible for use with ASI. Both the signal and ground paths between equipment are isolated, there is no distortion of the signal.

LAMGI02 is for use with the AES, MADI and ASI standards. It is built into a cylindrical plastic (for isolation) enclosure, fitted with a BNC connector at each end. An industry-standard size mounting flange is fitted at one end for through panel mounting.

Specifications:

Input and output impedance: 75 ohms.
Return loss: Better than 20dB.
Bandwidth 0.5 MHz to 360 MHz, - 0.25dB
Breakdown Voltage 100V

Dimensions: 30 x 20 (l x diameter) mm. mounting flange 31 x 26 mm Weight: 37g.